---
title: "Integrate Cisco Meraki with Red Canary"
slug: "integrate-cisco-meraki-with-red-canary"
updated: 2026-09-09T16:09:35Z
published: 2026-09-09T16:09:35Z
canonical: "docs.redcanary.com/integrate-cisco-meraki-with-red-canary"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.redcanary.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Integrate Cisco Meraki with Zscaler MDR

Integrating Cisco Meraki with Zscaler MDR provides a robust security posture by combining cloud-managed networking with advanced threat detection and response capabilities. This integration enables organizations to efficiently monitor network activity, identify potential threats, and accelerate incident response times. To integrate Cisco Meraki with Zscaler MDR, follow the procedure below from beginning to end.

## Prerequisite

- You will need the Threat Protection option in Meraki, which requires the Advanced Security Edition Licensing within the The security/SD-WAN appliance product line (MX) offering.

## **Step 1: Zscaler MDR–Create your Zscaler MDR-provided URL**

Create a Zscaler MDR provided-URL to send Cisco Meraki alerts for ingestion.

1. In the Zscaler MDR portal, click **Integrations** and **See all integrations**.

![](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/integrations(15).png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
2. Type and select Cisco Meraki.

![](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/Meraki.png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
3. Click **Configure**.
4. Enter a Name for your external alert source.
5. Select a Display Category.
6. Under the Ingest Format/Method dropdown, select **Meraki via HTTP**. This is the preferred ingest method and generates the best data for investigation and correlation. Please do not use the other available ingest methods.
7. Click **Save Configuration**.
8. Click **Activate it to begin processing alerts**. This will generate the URL you will use to send Cisco Meraki alerts to.

> **Note**: You may need to refresh the page for the URL to appear.

![1.png](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/10608039681303.png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
9. Copy and save the Zscaler MDR-provided URL. You’ll use this URL in a later step.

![2.png](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/10608039674007.png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)

## **Step 2: Cisco Meraki–Enter your Zscaler MDR-provided URL**

Adjust your Cisco Meraki alert settings to send generated alerts to your Zscaler MDR-provided URL.

1. From your Cisco Meraki homepage, click **Network-wide**, and then click **Alerts**.

![](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/image(18).png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
2. From the Network-wide section, select **A rogue AP is detected**.
3. From the Security appliance section, select **Malware is blocked**.
4. From the Security appliance section, select **Malware is downloaded**.

> **Note**: Other alert types are allowed but not required.

![](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/image(20).png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
5. Scroll down to the Webhooks section, and then click **Add an HTTPS receiver**.
6. Enter **Zscaler MDR** in the name field.
7. Enter the URL from [Step 1.10](https://redcanary.document360.io/docs/integrate-cisco-meraki-with-red-canary#:~:text=Copy%20and%20save%20the%20Red%20Canary%2Dprovided%20URL.%20You%E2%80%99ll%20use%20this%20URL%20in%20a%20later%20step.).
8. Delete the text in the shared secret field.
9. From the Payload template dropdown select **Meraki**.
10. [Assign the Alert](https://developer.cisco.com/meraki/webhooks/introduction/#assign-alerts:~:text=Network%2Dwide%20%2D%2D%3E%20alerts-,Assign%20Alerts,-Configured%20HTTP%20servers) to the new webhook per Cisco Meraki’s instructions.
11. Click **Send test webhook**.

![](https://cdn.document360.io/75147bee-bf0d-444c-8afb-6e83b11ec0ef/Images/Documentation/image(22).png?sv=2026-02-06&spr=https&st=2026-11-04T15%3A02%3A53Z&se=2026-11-04T16%3A02%3A53Z&sr=c&sp=r&sig=pC5TeBpYbkUFK%2BMuouyhlRssTPKXNbofI0hcac%2FkY38%3D)
12. Click **Save**.